As a result of the frequent utilization and administration of medical gas as drugs in the united states, the FDA are seeking for ways to increase industry and consumer knowledge about the regulation put in place for this specialized products. This is to enable them make informed and lifesaving choices when purchasing and administering this product. One of the attempts at mass awareness is Cylinder markings; each medical gas cylinder has peculiar mark that is permanently fixed to its neck. This is to identify the regulatory body governing the use of the cylinder, its serial number, the date of production, the last tri air medical gas test date, a sticky notes showing its content and the hazard color and class code (blue represents nitrous oxide, yellow stands for air, and green is used for oxygen etc.), its service pressure. Each medical gas cylinder also has a specially made valve weaved into it for the specific gas that it contains.
Another attempt is the pin index safety system, which is used to avoid a cylinder used for compressed gas from being used for the wrong gas. It is also to prevent the linking of the wrong cylinder to the neck of an anesthesia machine or to a wrong pipeline within the health institution. This system is done by drilling three holes in the valve of the gas cylinder that links with matching pins on the neck of the pipeline or anesthesia machine that is being used. The cylinder large middle opening is the gas opening. The other two openings are drilled to agree with the specifications of the pin index safety system for the gas the cylinder is constructed to carry. This system is not a complete proof against the medical mix-ups. Proper tri air medical air tests and training of the staff can be used to combat these mix-ups. Click here to know more about #https://airtesting.com/medical-gas-testing/.
No comments:
Post a Comment